funnyman82 wrote:
Have you been in contact with your design consultant? I had Kristen and she was amazing! I would ask her these similar questions and she would reply within one day or same day.
Our design consultant has been very good, but has given some questionable answers, so i'll doubel check everything when we go in. I have an excel with all the prices, so i'll compare it at the time.
Gas line for stove cost me $400 through Nissan Air and he plug conversion was $35 at Home Depot
Water line for fridge is definitely worth it to have done by mattamy. And I'm not sure why it is listed without shutoff but I got the shutoff. I would highly recommend a shutoff in case of servicing or changing the filter erc.
I'll confirm this with her, it doesn't make sense to not have shut off.
Valence lighting, I assume under cabinet? We had just done the rough in which gave us the proper junction boxes under the cabinet and a seperate switch to control them. We had the lighting installed after closing.
We have the alternate kitchen so its all continuous, so does this mean we just need one junction box/plug and one independent switch.
Who did you use to do your valence lighting and are you able to tell me the cost?
We upgraded our faucet to a motion sense arbor styl and was about $550
Smooth ceiling is the way to go. I believe knock down stipple is another style
Door hardware deco is a square plate I believe
I believe they do regular paint, have not paid attention to it.. But why are you spraying the ceiling lol!
Sorry i meant, if one doesn't' get the ceiling tiles, do they put high gloss paint in washrooms (kitchen and bath paint), as it is more resistant to moisture?
Hope I helped answer a few of your questions
Very helpful. Thank you.
We were also told we couldn't delete the bulk head, but we have an option for uppers in our design book (for our layout; it specifically mentions open concept with alt kitchen), so i'm confused as to how they'd acomodate the uppers without deleting the bulk head?